Difference between revisions of "0708-1300/Class notes for Tuesday, January 22"

From Drorbn
Jump to: navigation, search
(First Hour)
(First Hour)
Line 86: Line 86:
Hence we know that <math>\pi_1^{ab}(\Sigma_g) \cong \mathbb{Z}^{2g}\neq\mathbb{Z}^{2g'} \cong\pi_1^{ab}(\Sigma_{g'})</math>
Hence we know that <math>\pi_1^{ab}(\Sigma_g) \cong \mathbb{Z}^{2g}\neq\mathbb{Z}^{2g'} \cong\pi_1^{ab}(\Sigma_{g'})</math>
Of course, we need to know that in [[fact|0708-1300/fact]] <math>\mathbb{Z}^m\neq\mathbb{Z}^n</math> if <math>m\neq n</math>
Of course, we need to know that in [[0708-1300/fact fact]] <math>\mathbb{Z}^m\neq\mathbb{Z}^n</math> if <math>m\neq n</math>
As such, since the abelianizations are not isomorphic,neither are the original groups and the spaces themselves are not homeomorphic.   
As such, since the abelianizations are not isomorphic,neither are the original groups and the spaces themselves are not homeomorphic.   

Revision as of 16:58, 18 February 2008

Announcements go here


Pictures for a Van-Kampen Computation

In[1]:= << KnotTheory`

Loading KnotTheory` version of January 13, 2008, 20:30:12.1353.
Read more at http://katlas.org/wiki/KnotTheory.

In[2]:= TubePlot[TorusKnot[8, 3]]
Out[2]= {{{width}}}
In[3]:= TC[r1_, t1_,r2_,t2_ ] := { (r1 +r2 Cos[2Pi t2])Cos[2Pi t1], (r1 +r2 Cos[2Pi t2])Sin[2Pi t1], r2 Sin[2Pi t2] };
In[4]:= InflatedTorus[p_, q_, b_] := ParametricPlot3D[ TC[ 2, p t - q s, 1 + b(p^2 + q^2)s(1 - (p^2 + q^2)s), q t + p s ], {t, 0, 1}, {s, 0, 1/(p^2 + q^2)}, PlotPoints -> {6(p^2 + q^2) + 1, 7}, DisplayFunction -> Identity ];
In[5]:= GraphicsArray[{{InflatedTorus[3,8,1], InflatedTorus[3,8,-1]}}]
Out[5]= 0708-1300-InflatedTori.png

Typed Notes

First Hour

Today's Agenda:

1) More Examples of Van-Kampen Theorem

2) More Diagrams

3) Proof of Van-Kampen (was not done)

We began by recalling the examples from last class. I will not repeat that here, merely making a few additional comments that came out:


Technically, A*_H B is poor notion as it implies that knowledge of A, B and H is sufficient to construct A*_H B. In fact, we ALSO need to know the maps from H into A and B respectively in order for A*_H B to be defined.


Last class we simply wrote down the schematic for the two holed torus as an octagon with the identifications on the edges given last class. We now consider how one arrives at this schematic.

To create the two holed torus one begins with two tori. One then cuts out a small open disk from each torus and then glues the two boundaries together. Let us consider what this looks like when considering a torus as the normal schematic with a square in the plane with the normal identification of the sides. Removing an open disk is equivalent to removing the inside of a loop starting at one of the corners and finishing at that same corner. This is equivalent to making a pentagon with sides aba^{-1}b^{-1}c where c is the added edge.

Consider two such pentagons, gluing along the edge c forms precisely the octagon we had for the two holed torus last class.

0708-1300 notes 22-01-08a.jpg


Letting \Sigma_g denote the g holed torus, then \Sigma_g\neq\Sigma_{g'}

(Note, I used the symbol \neq to as the normal \ncong command doesn't seem to work. Take its meaning in context.)

Aside: Consider a functor from the category of groups to the category of Abelian groups via

G\mapsto G^{ab} = G/(ab=ba)

If we have a (homo)morphism from G\rightarrow H then the functor takes H\rightarrow H^{ab} and yields a map G^{ab}\rightarrow H^{ab} such that everything commutes.

Hence we know that \pi_1^{ab}(\Sigma_g) \cong \mathbb{Z}^{2g}\neq\mathbb{Z}^{2g'} \cong\pi_1^{ab}(\Sigma_{g'})

Of course, we need to know that in 0708-1300/fact fact \mathbb{Z}^m\neq\mathbb{Z}^n if m\neq n

As such, since the abelianizations are not isomorphic,neither are the original groups and the spaces themselves are not homeomorphic.


\pi_1(\mathbb{R}P^2) is \pi_1 of the space which can be written as a disk with two antipodal points on the boundary circle on it with the identification that the top path a (going clockwise along the boundary) is glued to the bottom path (also going clock wise). But \pi_1 of this is just <a>/(a^2 = e) \cong \mathbb{Z}/2


Puncturing an n-manifold, n\geq 3, does not change \pi_1(M). I.e., if p\in M^n then \pi_1(M)\cong\pi_1(M-\{p\})


Let U_1 = M-\{p\}

U_2 = a coordinate patch about p.

Then U_1\cap U_2 = B^n-\{p\}\cong S^{n-1}

If n=3, \pi_1(S^2) = \{e\} as we have computed before.

Hence, \pi_1(M) = \pi_1(U_1)*_{\{\}}\{\} = \pi_1(U_1)

Now, \pi_1(S^3)\cong\pi_1(S^3-\{p\}) = \pi_1(B^3) = \{e\}

Continuing inductively the theorem holds for all n.


If X is connected and b_1,\ b_2\in X then \pi_1(X,b_1) = \pi_1(X,b_2). I.e., it does not matter which base point we choose in a connected space, the fundamental group is invariant of this.


Consider a path \eta from b_1 to b_2. The returning path is denoted \bar{\eta}

Consider a loop from b_2 called \gamma.

Then get a loop from b_1 via \gamma\mapsto \bar{\eta}\gamma\eta

Similarly about b_2, \gamma\mapsto\eta\gamma\bar{\eta}

Considering the composition we get \eta\bar{\eta}\gamma\eta\bar{\eta}\sim\gamma.

Second Hour


S^3 is the union (with common boundary) of two solid tori S^1\times D^1

The natural way to add two tori with common boundary would be two glue the boundaries of two disks (making S^2) together for each angle going around the torus thus yielding S^1\times S^2. Clearly this is not the same as S^3 as the fundamental groups differ.

Instead consider the following description. Look at a torus in the zx plane, this looks like two disks with the z axis in between them such that rotating these two disks about the z axis will yield the torus.

Lets now add in the second torus into this picture. We first draw a horizontal line between the two disks. We then "blow" up from beneath so the horizontal line is slightly curved. We imagine continuing to blow yielding larger and larger loops between the two disks until it "pops" forming the pure horizontal line consisting of the loop at infinity. Do the same for the bottom. Hence, the boundaries of the two tori drawn this way clearly are the same, and between the two cover the entire zx plane (and "point at infinity). Rotating this picture about the z axis yields all of S^1 as the union of these two sets.

0708-1300 notes 22-01-08b.jpg


\pi_1(S^3) = \{e\}

U_1 = the normal solid torus thickened a bit and under \pi_1 yields <\alpha>

U_2 = the other solid torus, also thickened a bit, under \pi_1 yields <\beta>

U_1\cap U_2 is a normal torus only with slightly thick walls opposed to infinitely thin ones (homotopically the same)

So, \pi_1(U_1\cap U_2)\cong\mathbb{Z}^2 \cong <a,b>/ab=ba

So, \pi_1(S^3) \cong\mathbb{Z}*_{\mathbb{Z}\times\mathbb{Z}}\mathbb{Z}

However, we still need to describe i_{1*} and i_{2*}

Do do this let me describe a,b,\alpha and \beta explicitly.

Considering the description of the two tori given above, we let a go around the outside of one of the two disks in the plane and b go from a point on the boundary of the same disk, following the rotation about the z axis, to a point on the boundary of the other dis. \alpha is similar to b, but thought of as being on the boundary of the OTHER torus. \beta consists of the path along the z axis.



a\rightarrow e

b\rightarrow \alpha



b\rightarrow e (as it is contractible)

Hence, \pi_1(S^3) = F(\alpha, \beta)/(e=\beta, \alpha = e)

Hence, \pi_1(S^3) = \{e\}


Define the "Torus knot T_{p,q}" where p and q are relatively prime integers. The knot T_{8,3} is given above. We can think of this in the following ways:

1) T_{p,q} is the knot that wraps around the torus p times one way and q times the other way.

2) Formally, let \sigma:S^1\times S^1\rightarrow\mathbb{R}^3 be the standard embedding of a torus. Let \gamma:[0,1]\rightarrow S^1\times S^1 be t\rightarrow (e^{2\pi i pt}, e^{i2\pi qt})

Then T_{p,q} is \sigma\circ\gamma

3) Recall that the torus can be thought of as the image of the mapping \mathbb{R}^2\rightarrow\mathbb{R}^2/\mathbb{Z}^2

Consider the rectangle in the real plane: ([0,p],[0,q]) and consider the path which is the diagonal line from the corner (0,0) to the corner (p,q)

No two points on this line are the same under the mapping down to the torus. If they were, then \Delta y and \Delta x would be integers and hence \Delta y/\Delta x would be the slope of the line. But the slope of the line is q/p which is already in lowest common terms by assumption.

Lets compute the fundamental group of the compliment of the torus knot.


U_1: inflated bagel, constrained by T_{p,q}

U_2: inflated bubble constrained by T_{p,q}

(See top of page for pictures)

The intersection U_1\cap U_2 looks somewhat like a belt. It has some thickness to it and is wrapped around the torus, eventually forming a loop. Hence it looks like a squashed disk cross a circle. Hence, under \pi_1 this is just \mathbb{Z}\cong<\gamma> where \gamma is the path parallel to T_{p,q}

We thus get the maps,

i_{1*}: \gamma\mapsto\alpha^p


Hence, \pi_1(T_{p,q}^c) = <\alpha,\beta>/\alpha^p = \beta^q

Thus, T_{p,q}\neq T_{p',q'}


Recall our diagram from last class:

&\ \ \ \  U_1&&\\
U_1\cap U_2&&&U_1\cup U_2\\
&\ \ \ \  U_2&&\\

U_1\cup U_2 can be defined as the object such that the above diagram commutes and should the following commute:

&\ \ \ \  U_1&&\\
U_1\cap U_2&&&Y\\
&\ \ \ \  U_2&&\\

Then there is a unique map between U_1\cup U_2 and Y such that the composed diagram commutes.

Indeed, the same is true for general categories.


&\ \ \ \  G_1&&\\
&\ \ \ \  G_2&&\\

commuting, P is defined as an object such that if also

&\ \ \ \  G_1&&\\
&\ \ \ \  G_2&&\\

were to commute then there is a unique morphism from P to Q such that the composed diagram computes.

In the category of groups, this "pushforward" P is unique and is isomorphic to G_1*_H G_2